Congratulations! You are now on your way to produce top quality concrete products with these extremely tough and durable high detailed Polyvinyl Chloride Moulds - the best possible method of reproducing the highest standard of detail in concrete paving products.
If your Polyvinyl Chloride Moulds (or any other rubber mould) is used according to these guidelines it will ensure great detail on your concrete products, and years of satisfaction.
Some release lubricants/agents attack different types of rubber in different ways. Lubricants like old/new motor oil, diesel, and old cooking oil etc. should never be used on your Polyvinyl Chloride Moulds. (- or any other rubber mould.)
Always support or brace your mould with wood or plywood around the sides and bottom to ensure true shape and minimal stresses on the mould outer sides.
Avoid mould exposure to the sun. Shade is always the better option for any rubber product.
Never hit your mould with an object/hammer to de-mould your concrete products. If our prescribed release agent is used, your product will de-mould easily.
Never use sharp objects to clean or scrape off concrete residue from your mould. Your mould is abrasive resistant, not cut resistant!
Always clean your mould with water and a soft brush after use. Remove all cement-based residues. (Start each day with a clean mould.)
Copyright © 2017 Chennai Polymers, All rights reserved. Web Solutions @ C-Wave Technologies,
Best Viewed in 1280x1024 resolution